Position:SmartFiber > Product > Switch > 10G Switch >

Product

Product

Contact Us

Sales Contact:
Email:sales.smartfiber@gmail.com
Skype:SmartFiber Technology Co. Ltd.
WeChat:+8613656647662
Technical Support :
Email:ming50376@163.com

10G Ethernet Switch S5700-48T4TF

10G Ethernet Switch S5700-48T4TF

The 10 Gigabit switch S5700-48T4TF of SmartFiber is a BCM chip series of standard three-layer non-blocking switch. It is equipped with 48-bit 10/100 / 1000M RJ45 electrical ports, 4 integrated 10G SFP + optical ports, and one console port to provide sufficient bandwidth. It provides high capacity switching capability and supports Layer 3 and Layer 4 ACLs. Features. Perfect security control strategy and CPU protection policy to improve fault tolerance, ensure stable operation of the network and link load balancing. At the same time support automatic DoS attack defense and SNMP, IEEE 802.1, spanning tree, spanning tree protocol, Link aggregation and other functions, suitable for small and medium enterprises, campus network, Internet cafes and the edge of the use of metropolitan area network.
  • 1.2.1 High performance
    l With 300G backplane bandwidth
    l hardware routing, wire-speed three-tier exchange packet forwarding rate of 223.2Mpps
    l can be deployed in the metropolitan area network core, and provide a few last 1 km technology
    l Ethernet / IEEE802.3 packet size (64 bytes to 1522 bytes)
    ●    Large data packets up to 9216 bytes
    1.2.2 Safe and reliable
    ●Provide DOS, distributed denial of service, spoofing and viruses and other defense
    ● Support IEEE802.1x, providing port-based user authentication, network shield technology,security control technology and policy control list
    ● Limit the maximum number of ports connected to the host, the Ethernet interface for multiple binding, increase bandwidth and system redundancy
    ●Strong ACL, support L2-L4 layer data filtering
    1.2.3 Easy to use and maintain
    ●Can be through the Web, SNMP and other ways to manage
    ●Support XModem protocol, you can through TFTP / ZMODEM software upgrades and BootRom upgrade
    ●Support SFP +, but also backward compatible with XFP and so on
    1.2.4 Powerful traffic and broadcast management
    ●Automatically detect and suppress broadcast storms, support IGMP message detection, effectively limit the proliferation of broadcast messages
    ●Support full-duplex mode and half-duplex mode of flow control
    ●Supports the Ethernet interface to 1M speed limit
  • Brand name SmartFiber 
    Product model S5700-48T4TF
    Basic characteristics
    Fixed port 48*10/100/1000M RJ45 electronic port,4* integrated10G SFP+optical port、1*Console port
    Backplane bandwidth 300Gbps
    Packet forwarding rate 223.2Mpps
    Processor RISC 400
    Flash memory capacity 16MB
    Memory Capacity 128M
    MAC address table 16K
    Queue buffer 3MB
    Software specification
    Security features IP+MAC+PORT+VLAN Bind
    ARP detection
    DOS protection
    Port protection
    IP source port protection
    VLAN Port based VLAN
    802.1Q VLAN
    Based on IP
    Based on MAC
    Address table Static MACaddress table
    Dynamic MAC address table
    Storm control Broadcast suppression
    Multicast suppression
    DLF suppression
    Inhibition rate
    Flow control Half-duplex based on back pressure control
    Full duplex based on PAUSE frame
    Port mirroring Supports port mirroring
    Port management General settings
    Port statistics
    Configure the port
    Port aggregation
    Port isolation
    Service quality IEEE 802.1Qau congestion mechanism
    The 8 send queues per port map the 8 priorities of 802.1p
    IP service Ping detection
    DHCP detection
    Spanning tree MSTP(802.1s)、STP、RSTP
    Multicast management IGMP Snooping Multicast packet detection
    Syestem management SNMP v1/v2/v3
    Console management
    TELNET mode
    WEB interface  
    Remote upgrade Support upgrades via web implementation
    Support for local version upgrades
    physical dimension 440mm × 285mm × 44mm
    Power supply characteristics AC 110-240V Adaptive,47-63Hz,1A/230V,
    Power ≥80W
    Indicator Power indication, system indication, connection / send and receive instructions
    Environment  temperature / humidity 0-50 ℃ operation, -40-70 ℃ preservation, 0-90% non-condensing
     

相关产品

Copyright © 2019 SmartFiber Technology CO., LTD.